How to Use the Xbox Wireless Adapter with Cronus Zen

If you want to connect your Xbox controller wirelessly to a Cronus Zen, using the Xbox Wireless Adapter is one of the best solutions. This guide will walk you through setting up the adapter, pairing your controller, and troubleshooting any issues.

What is the Xbox Wireless Adapter?

The Xbox Wireless Adapter is a small USB device that allows you to connect Xbox controllers to a Cronus Zen without using Bluetooth. It provides lower latency, better compatibility, and multi-controller support compared to standard Bluetooth connections.

Setting Up the Xbox Wireless Adapter with Cronus Zen

Step 1: Connect the Adapter to the Cronus Zen

• Update the firmware of your Zen and the version of your Zen Studio
  • These should ALWAYS be the most up to date versions.
• Connect your Zen to your PC via the PROG and port (Right side of your Zen)
  • This is only for testing purposes, anytime after this you just need to connect to your Xbox via the Console port (Top of your Zen)
• Be sure your Xbox controller is NOT paired to your xbox. Pressing the xbox button should start the controller in pairing mode, not turn your console on. 
• Plug the Xbox Wireless Adapter into the A3 port (Front left port) of the Cronus Zen.
  • If the light on the adapter does not come on you can press the button on the adapter until the light starts flashing. 
• Connect your Xbox controller to the A1 port (Left port) of the Cronus Zen.
• After the eyes turn green wait for about 5 seconds then unplug your Xbox controller
• The light on your controller and the light on the adapter should be flashing
• The lights will both turn solid and stay solid when the pairing is complete
  • This could take several attempts, just wait for it to stay solid. You will see them both turn solid and then break the pair a few times before it finds a pair it likes. 

Step 2: Verify the Connection in Zen Studio

• Navigate to the Device Monitor tab in Zen Studio.
• Move your Xbox controller’s thumbstick or press a button. If the input is registered, your controller is successfully connected.

Troubleshooting Common Issues

Controller Not Pairing?

• Make sure the adapter is properly inserted into the Zen.
• Restart both the Cronus Zen and the controller, then try again.
• Make sure your Xbox controller is NOT paired to your Xbox

Controller Inputs Not Registering in Zen Studio?

• Open Zen Studio and check if the controller is detected.
  
• Be sure both the light on the controller as well as the wireless adapter are on and solid (not flashing)

Final Thoughts

Using the Xbox Wireless Adapter with your Cronus Zen allows for a seamless wireless experience with reduced lag and improved connectivity. Follow these steps to set up your device, and if you run into any issues, the troubleshooting tips should help you get back on track!

If you found this guide helpful, share it with others who use Cronus Zen and Xbox controllers!

YouTube Video can be found HERE